M8, M12 and M18 Inductive Sensors
LED status display
Plastic body
Operating temperature range -25° → +70°C
Reverse polarity and short circuit protection (dc types only)
Flush or non flush mount versions
| Attribute | Value |
|---|---|
| Body Style | Barrel |
| Thread Size | M18 x 1 |
| Output Type | Analogue, 4-20 mA |
| Detection Range | 8 mm |
| Terminal Type | Cable |
| Supply Voltage | 12 → 24 V dc |
| Length | 40.6mm |
| Maximum DC Voltage | 36V |
| Mounting Type | Non Flush |
| IP Rating | IP67 |
| Housing Material | Plastic |
| Maximum Operating Temperature | +70°C |
| Maximum Switching Frequency | 500Hz |
| Minimum Operating Temperature | -25°C |
Wire type and power : DC 3-wire type 12-24VDC
Sensing side diameter : M12
Sensing distance : 4mm
Installation : Shield(flush)
Standard sensing target : 12×12×1mm(iron)
Sensing type : Diffuse reflective type
Sensing distance : 300mm
Sensing target : Opaque, Translucent material
Light source : Infrared LED(940nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN, PNP open collector simultaneous output
• HP : 7.5HP
• Model : H-16LB
• Rating : 415V / 50Hz
• Overload : 10 ~ 16
