M8, M12 and M18 Inductive Sensors
LED status display
Plastic body
Operating temperature range -25° → +70°C
Reverse polarity and short circuit protection (dc types only)
Flush or non flush mount versions
| Attribute | Value |
|---|---|
| Body Style | Barrel |
| Thread Size | M18 x 1 |
| Output Type | Analogue, 4-20 mA |
| Detection Range | 8 mm |
| Terminal Type | Cable |
| Supply Voltage | 12 → 24 V dc |
| Length | 40.6mm |
| Maximum DC Voltage | 36V |
| Mounting Type | Non Flush |
| IP Rating | IP67 |
| Housing Material | Plastic |
| Maximum Operating Temperature | +70°C |
| Maximum Switching Frequency | 500Hz |
| Minimum Operating Temperature | -25°C |
Wire type and power : DC 3-wire type 12-24VDC
Sensing side diameter : M18
Sensing distance : 7mm
Installation : Shield(flush)
Standard sensing target : 20×20×1mm(iron)
Sensing type : Diffuse reflective type
Sensing distance : 300mm
Sensing target : Opaque, Translucent material
Light source : Infrared LED(940nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN, PNP open collector simultaneous output
Display method : 4-digit 7-segment LCD
Character height : 9mm
Max. display Range : -1999 to 9999
Measurement : DC voltage
Input specification : 0-50V, 0-10V, 0-5V, 0-1V, 0-250mV, 0-50mV
Power supply : 12-24VDC , 12-24VAC~
Approval :
