AR series
– For the AR series controlling switch, it is possible to
apply 2 types (Ø22 / Ø25) panel cutout dimension
and in case of using the guide bracket, it is even
possible to use it with the Ø30 hole. Various functions
and designs have made the selection choice wider
and attachment and detachment of the actuator/switch
part became very simple.
Hanyoung Control Switch AR Series
|
Model |
Code |
Content |
||
|
ARS- |
□ |
□ |
□ |
Selector switch |
|
Actuator type |
S |
|
|
Standard type |
|
Operation funciton |
2 |
|
2 positions altenrate operaiton |
|
|
2R |
|
2 positions momentary operation |
||
|
3 |
|
3 positions alternate operation |
||
|
3L |
|
3 positions left momentary opration |
||
|
3R |
|
3 positions right momentary opration |
||
|
3LR |
|
3 positions left/right momentary opration |
||
Sensing type : Through-beam type
Sensing distance : 10m
Sensing target : Opaque material of min. Ø12mm
Light source : Red LED(660nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN open collector
Power supply: 110/220VAC 50/60HZ
Allowable voltage range: 90 to 110% of power supply
Power consumption: Max 3VA
Display method: 7 Segment(red) LED method
Character size (WxH): 7.2 X 9.8mm
Display accuracy: F.S ±0.5% rdg ±1digit
Setting type: Digital setting
Setting accuracy: F.S ±0.5%
Sensor input: Thermocouples: K(CA),J(IC),R(PR)/RTD:DPt100Ω
※There is no R(PR) in T3S,T3H Series.
Input line resistance: Thermocouples:Max 100Ω /RTD: Allowable line resistance max 5Ω per a wire
Control output: relay output: 250VAC 3A 1C
SSR output: 24VDC ±3V 20mA Max
Current output: DC4-20mA (load 600Ω Max)
Wire type and power : DC 3-wire type 12-24VDC
Sensing side diameter : M12
Sensing distance : 4mm
Installation : Shield(flush)
Standard sensing target : 12×12×1mm(iron)
