GF series
– Counter/Timer
– Set up digit of decimal points
– Selection of voltage/non-voltage inputs
– Timer range 16 kinds (10/60hexadecimal digits each 8 kinds)
Hanyoung Counter/Timer GF series
| Model | Code | Information | |||
| GF4- |  |
|
|
|
Digital counter / Timer (48 X 48 ㎜) |
| Type | P | Pre-set counter | |||
| T | Total counter | ||||
| Displayable digits | 4 | 4 digits (9999) | |||
| Setting stage | 0 | None (total counter) | |||
| 1 | 1st stage setting (Preset counter) | ||||
| Terminal structure | N | Terminal | |||
| S | 8 pin structure (suitable for 8 pin socket) | ||||
Sensing type : Narrow beam reflective type
Sensing distance : 70 to 130mm
Sensing target : Opaque, Translucent material(min. sensing target: min. Ø0.2mm(copper wire))
Light source : Red LED(650nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN open collector
Illuminated : Non-illuminated
Button type : Extended
Color : Black
Contact block : A contact: 1, B contact: 1
Contact block type : Singular type
Wire type and power : DC 3-wire type 12-24VDC
Sensing side diameter : M12
Sensing distance : 4mm
Installation : Shield(flush)
Standard sensing target : 12×12×1mm(iron)
