GE series
– Batch function
– NPN/PNP input selectable
– Pre-scale setting
– Display decimal points up to 4 digits
– Off set setting
Hanyoung Counter/Timer GE Series
| [ GE series ] |
| Model | Code | Information | ||||
| GE |  – |
|
|
|
|
Digital Counter |
| Dimension | 3 | 96 × 48 mm | ||||
| 4 | 48 × 48 mm | |||||
| 6 | 72 × 36 mm | |||||
| 7 | 72 × 72 mm | |||||
| Type | P | Pre-set counter | ||||
| T | Total counter (only for indication) | |||||
| Displayable digit | 4 | 4 digits (9999) ※ GE3 and GE7 are not selectable | ||||
| 6 | 6 digits (999999) | |||||
| Setting level (excludes the total counter) |
1 | 1st level setting | ||||
| 2 | 2nd level setting | |||||
| Power supply voltage | A | 100 – 240 V a.c. 50 – 60 ㎐ | ||||
| D | 24 – 60 V d.c / a.c 50 – 60 ㎐ | |||||
Display method : 4-digit 7-segment LED
Control method : ON/OFF control, P, PI, PD, PID control
Input specification : Thermocouple: K(CA), J(IC), T(CC), R(PR), S(PR), L(IC)
RTD: DPt100Ω, Cu50Ω
Sampling cycle : 100ms
Control output : Relay(250VAC~ 3A) or SSR drive(12VDC ) [ON/OFF]
Power supply : 100-240VAC~ 50/60Hz
Approval :
Wire type and power : DC 3-wire type 12-24VDC
Sensing side diameter : M08
Sensing distance : 2mm
Installation : Non-shield(non-flush)
Standard sensing target : 8×8×1mm(iron)
Power supply: 110/220VAC 50/60HZ
Allowable voltage range: 90 to 110% of power supply
Power consumption: Max 3VA
Display method: 7 Segment(red) LED method
Character size (WxH): 7.2 X 9.8mm
Display accuracy: F.S ±0.5% rdg ±1digit
Setting type: Digital setting
Setting accuracy: F.S ±0.5%
Sensor input: Thermocouples: K(CA),J(IC),R(PR)/RTD:DPt100Ω
※There is no R(PR) in T3S,T3H Series.
Input line resistance: Thermocouples:Max 100Ω /RTD: Allowable line resistance max 5Ω per a wire
Control output: relay output: 250VAC 3A 1C
SSR output: 24VDC ±3V 20mA Max
Current output: DC4-20mA (load 600Ω Max)
