AR series
– For the AR series controlling switch, it is possible to
apply 2 types (Ø22 / Ø25) panel cutout dimension
and in case of using the guide bracket, it is even
possible to use it with the Ø30 hole. Various functions
and designs have made the selection choice wider
and attachment and detachment of the actuator/switch
part became very simple.
Hanyoung Control Switch AR Series
|
Model |
Content |
|||||
|
ARE- |
□ |
□ |
□ |
Emergency stop switch |
||
|
Actuator |
3 |
|
|
Ø30 Mushroom type | ||
|
4 |
|
|
Ø40 Mushroom type | |||
|
6 |
|
|
Ø60 Mushroom type | |||
|
Operation funciton |
B |
|
Momentary |
|||
|
P |
|
Push lock full reset *Except ARE-3 |
||||
|
R |
|
Push lock turn reset |
||||
|
K |
|
Push-lock key reset |
||||
|
Actuator color |
R |
R(Red), G(Green), Y(Yellow) |
||||
Display method : 5-digit 7-segment LED
Character height : 8mm
Max. display Range : -19999 to 99999
Measurement : 14 operation modes: Frequency, Revolutions, Speed, Cycle, Time, Ratio, Density, Length measurement, Interval, Accumulation, Addition/Subtraction, etc.
Measurement range : 0.0005Hz to 50kHz, 0.01 to max. of each time range, 0 to 99999, -19999 to 99999
Input method : Voltage input(PNP), No-voltage input(NPN)
Power supply : 100-240VAC~ 50/60Hz
Approval :
Wire type and power : DC 3-wire type 12-24VDC
Sensing side size : Frame size 12mm
Sensing distance : 4mm
Standard sensing target : 12×12×1mm(iron)
Response frequency : 500Hz
Sensing type : Through-beam type
Sensing distance : 10m
Sensing target : Opaque material of min. Ø12mm
Light source : Red LED(660nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN open collector
