AR series
– For the AR series controlling switch, it is possible to
apply 2 types (Ø22 / Ø25) panel cutout dimension
and in case of using the guide bracket, it is even
possible to use it with the Ø30 hole. Various functions
and designs have made the selection choice wider
and attachment and detachment of the actuator/switch
part became very simple.
Hanyoung Control Switch AR Series
|
Model |
Code |
Content |
||
| ARE- |
□ |
□ |
□ |
Illuminated emergency stop switch |
|
Actuator |
3 |
|
|
Ø30 Mushroom type |
|
4 |
|
|
Ø40 Mushroom type | |
|
Operation funciton |
XR |
|
Push lock turn reset |
|
|
Actuator color |
R |
R(Red), G(Green) *Only ARE-3XR |
||
Display method : 5-digit 7-segment LED
Character height : 8mm
Max. display Range : -19999 to 99999
Measurement : 14 operation modes: Frequency, Revolutions, Speed, Cycle, Time, Ratio, Density, Length measurement, Interval, Accumulation, Addition/Subtraction, etc.
Measurement range : 0.0005Hz to 50kHz, 0.01 to max. of each time range, 0 to 99999, -19999 to 99999
Input method : Voltage input(PNP), No-voltage input(NPN)
Power supply : 100-240VAC~ 50/60Hz
Approval :
Display method : 4-digit 7-segment LED
Character height : 14.2mm
Max. display Range : -1999 to 9999
Measurement : DC voltage
Input specification : 0-500V, 0-100V, 0-50V, 0-10V, 0-5V, 0-1V, 0-250mV, 0-50mV
Power supply : 100-240VAC~ 50/60Hz
Approval :
Sensing type : Narrow beam reflective type
Sensing distance : 70 to 130mm
Sensing target : Opaque, Translucent material(min. sensing target: min. Ø0.2mm(copper wire))
Light source : Red LED(650nm)
Response time : Max. 1ms
Power supply : 12-24VDC ±10%(ripple P-P: max. 10%)
Operation mode : Light ON/Dark ON(set by switch)
Control output : NPN open collector
